Worktops - Flipbook - Page 8
Product specification
Stainless table tops
Table tops in stainless steel are made of min. 1.25 mm
thick sheets folded and glued on fibreboard or particle
board coated with melamine on the underside. Edges
are folded around the table top and sealed, preventing
penetration of moisture. Edges can come with or without a
raised edge and multiple profile types are available.
The steel type is acid-proof stainless steel AISI 316 with a
machine-polished surface.
Stainless table tops are delivered according to customer
requirements with regards to the shape of the table top
and sink size.
Stainless table top with
raised edge.
Possibility of other edge
profiles.
Sink welded with table top.
This provides an easy and
maintenance-free
transition between sink
and table top.
The stainless table top is fairly chemical-resistant (see
the chart on the reverse side) and has a fairly high heat
resistance.
Welded sink: The sink is
welded to the steel sheet.
The transition between sink
and sheet is polished so the
seam is invisible. A durable
and cleaning-friendly
solution.
Material:
Stainless steel acid-proof AISI 316
Resistance:
Good chemical resistance
(see resistance chart on reverse side)
Surface:
Machine-polished surface
Edge profile:
Comes with raised edge or straight
front edge. Special shapes are available
on request.
Thermal stress: Good (see chart on reverse side)
Sink materials: Sinks come in stainless steel and are
welded to the table top with a smooth
transition
Overhang:
Max. 200 mm
Reinforcement requirement: Per 1000 mm
Zystm A/S • Lillelundvej 18 -20 • DK 7400 Herning
9666 6660 • info@zystm.com • www.zystm.com
BACK TO• Tel.:
CONTENT