Service spine, installation bridge and accessories - Flipbook - Page 7
Product specification
Vertical media duct (VMD)
in laminate
A vertical media duct provides contained access routes for
mechanical pipework and electrical cabling services.
VMDs are designed as a closed box with a front access
panel which, depending on the specification, is either
hinged or fitted with a Keku push-on fitting, this provides
access to the services and isolation valves contained
within.
VMDs can be used for supplying
contained access routes from
low level up to the underside of
the technical panel or from high
level down to the surface of the
technical panel depending upon
the location of the services
distribution.
Laminate board VMDs have glued laminate to both sides
with 1 mm ABS banding or a 2 mm 3D acrylic edge to all
edges.
Subject to specifications, the VMD is supplied with internal
ISO mounting rail C-profile for suspension of pipework and
cabling.
VMDs are supplied and delivered to site fully factoryassembled.
Vertical media ducts can also
be manufactured from steel
when specified.
Sides of VMD 17.4 mm laminate board
Fitting:
Keku
Hinges:
Where used, hinges are ”push
open” or Zystm standard hinges.
Closure system:
Magnetic lock or lock
Zystm A/S • Lillelundvej 18-20 • DK 7400 Herning
• Tel.:
9666 6660 • info@zystm.com • www.zystm.com
BACK TO
CONTENT