Function tables, trolleys and rolling stock - Flipbook - Page 15
Product specification
Charging point
EPJ table
Charging point with visible light-emitting diodes to 3 sides.
The first time you switch on (or during power failure) it will
calibrate and the yellow lamp will flash 20 times without
the battery.
When the battery is attached the charging will commence
and the yellow lamp lights after 2 sec.
The battery is fully charged when the yellow lamp goes
out.
If the battery is below 40% capacity when plugged into
the charging point the charger will start forced charging
for 2 hours. If the battery is removed during this period the
yellow lamp remains on even without the battery but the
charger continues charging. This is a precaution for continous charging.
The battery should be removed when the yellow lamp is
off.
Charger type ver:
2020
Voltage:
230V
HZ:
50
Charger voltage:
25,7V
Charging current:
0,5A
IP:
X5
Zystm A/S • Lillelundvej 18 • DK 7400 Herning
Tel.:
9666 6660 • info@zystm.com • www.zystm.com
BACK •TO
CONTENT