Function tables, trolleys and rolling stock - Flipbook - Page 11
Product specification
Functional description of 230V
module for EPR-/data tables
The 230V module for EPR tables provides opportunity to
connect the table and therefore the computer and screen
directly to a 230V supply.
Without connection to 230V the table can still work with
the external battery which provides approximately 4 hours
usage per charge when powering the table, computer and
screen.
If the EPR table is connected to a 230V supply the
computer and screen will use power from the 230V
connection and not the battery. Please note that the
battery will not charge from the 230V supply.
When 230V is connected to the EPR table the height
adjustable function will still use power from the battery.
This means the battery lasts longer if it is only used for
normal height adjustment with the table connected to
230V, a newly charged battery will in this scenario last
approximately 56 hours.
If you disconnect the table from the 230V supply while
using a computer the power supply will immediately
transfer to the battery as a laptop does when
disconnected from an external power supply. You must
always remember to check the battery indicator before
disconnecting the 230V.
The module requires installation by a Zystm technician,
please contact the company for further information.
Zystm A/S • Lillelundvej 18 • DK 7400 Herning
Tel.:
9666 6660 • info@zystm.com • www.zystm.com
BACK •TO
CONTENT